UZ15 RAPID

2 bevelers in one + 3D adaptive system = unique bevelling solution.

The UZ 15 RAPID creates welding-ready bevels on linear plates with automatic feed. Bevel angle adjusts continuously from 15° to 50° without replacing any parts. Both X and K bevels are possible. Functions as a stationary or moveable station.

We offer this machine in the following models and voltages:

Bevelling system UZ15 Rapid

Art. Nr. 1931 – 400V, 3 phase

SET – Bevelling system UZ15 RAPID
including the 3D MANIPULATOR
Art. Nr. 1932 – 400V, 3 phase

Key benefits

UZ15 RAPID

• UZ15 RAPID creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 85,000lbs/in² or 60kg/mm2), stainless steel, brass, copper and aluminium. It cuts bevels from 3/16 to 1-9/16″ (5 to 40 mm) in thickness, with a minimum plate width of 2-3/4″ (70 mm) and minimum plate length of 5-7/8″ (150 mm).
  The beveling angle adjusts continuously from 15° to 50° without replacing any parts. The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scales.
• It can be hooked to the piece to be machined in either a horizontal or vertical position. When used with the trolley, the machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
• Easily attaches to trolley 180°.
• Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material.
• Assembles or disassembles in seconds without tools with a unique clamping system – Lift handle on trolley adjusts machine to working height.
• Functions as a stationary or a moveable station.
• Package discount available when machine and trolley are purchased together.
• Manipulator provides a simple, quick turn of the UZ15 RAPID by 180° to create double-sided bevels X, K. The operator does not need a crane to rotate the material. There is a significant time saving at work.
• Unique clamping system allows the UZ15 RAPID to be assembled and disassembled (Quick System) within a few seconds without using any tools. The beveler UZ15 RAPID is “floating” on MANIPULATOR 3D and compensates for unevenness of the floor.

Manipulator 3D

• MANIPULATOR 3D allows easy manipulation with beveler.
• The required height of the machine can be set using the MANIPULATOR 3D lift handle.
• Travel is provided by massive wheels mounted on the carriage.
• Possibility to bevel with MANIPULATOR 3D or without.
• Possibility to use the MANIPULATOR 3D as a stationary station.