UZ29 SPEEDER

One of the largest and most powerful machines in the field of rotary cutting bevelling machines. Maximum bevel width 29 mm / 1.14 in. Automatic feed. Bevel width 18 mm / 0.7 in in first cut by feeding speed 1.8 m/min. / 5.9 ft/min. The machine is equipped with an automatic feed and can be used as a stationary machine designed for large and small volumes of smaller workpieces. At the same time it can be used as a mobile bevelling system when the machine moves along the machined steel sheet at a rate of almost two meters per minute. The UZ 29 SPEEDER is capable of machining both standard and stainless steel. The machine has a supersilent drive not increasing the noise at the workplace. In addition it is possible to flip the entire machining unit upside down and create bevels for X and K form of the welds without handling machined material. This application is made possible by the rotary mechanism of the 3D manipulator, which is a standard machine equipment.

We offer this machine in the following voltages:

Bevelling system UZ29 Speeder – KIT 30° + 45°

• Art. Nr. 1962- 400V, 3 phase
• Art. Nr. 1903 – 480V, 3 phase
• Art. Nr. 1907 – 220V, 3 phase

Key benefits

• For conventional steel (up to strength 700 MPa / 101 526 PSI) , stainless steel, brass, copper and aluminium materials.
• The bevelled material thickness 6 to 60 mm / 0.23 to 2.36 in .
• The bevel angle can be adjusted by removable arms (KIT for a given angle).
• The device is able to perform the double-sided bevel (X, K), without any need for material handling.
• Surprisingly silent drive.
• The machine is equipped with the automatic feed.
• The possibility of stationary and mobile use.
• 3D Manipulator allows to adapt UZ 29 Speeder for any unevenness of deformations in the length of machined material. It also allows to work on uneven floor.
• Smaller parts of the material are inserted directly into the machine.
• One-man machine.

Included in the price

• Bevelling system UZ 29 SPEEDER.
• Tools for an operator.
• User manual.