UZ50 Triumph beveler

Bevelling system UZ 50 Triumph is another of the series of unique solutions developed N.KO Machines. Basically, three beveling systems are combined in a single machine. UZ50 Triumph can be used as a mobile beveller, which moves along the beveled material at the speed up to 1.2m/min, 3.93 ft/min. The range of the beveling angle is 15°-50°. In addition, it is possible to flip the entire machining unit upside down and create bevels for X and K form of the welds without handling machined material. This application is made possible by the rotary mechanism of the 3D manipulator, which is a standard machine equipment. Finally, the machine can be rebuilt for a stationary beveller with a special equipment UZP 30. This mode is intended for processing smaller parts with a minimum length of the bevel edge 200mm, 8.19 in. Adjustable cutting conditions enable the UZ50 to machine otherwise difficult materials like stainless steel, Hardox (armored steel), Weldox and Domex on top of mild carbon steel. 3D manipulator allows to adapt UZ50 for any unevenness or deformations in the length of machined material. It also allows to work on uneven floor. If needed it is possible to disconnect the UZ50 from the manipulator completely due to the quick-connect function within few seconds and use the UZ50 separately.

• automatic feeding, automatic feed speed adjustment with inverter, 0 -1,2m/min.
• high speed milling head with very resistant inserts, max. width of bevel 62mm/15°, 50mm/45°.
• 15-60° infinitely variable angle, without replacing any parts.
• material thickness 7 – 80 mm.
• the electric circuit is enclosed in a dust proof box and is equipped with all the safety devices necessary.
• CE conformity declaration.
• unique MANIPULATOR 3D – manipulator provides a simple quick turn UZ50 Triumph of 180° to create double sided bevel X K. The operator does not need a crane to rotate the material. There is a significant saving of work time.
• the unique clamping system allows the machine UZ 50 Triumph to be assembled and disassembled (Quick System) within a few seconds without using any tools.
• the beveler UZ 50 Triumph is “floating” on MANIPULATOR 3D and compensates the unevenness of the floor or the deformations of the steel plate.
• MANIPULATOR 3D allows the easy manipulation with beveler.
• the required height of the machine can be set up by MANIPULATOR 3D by lift handle.
• the movement of the machine is provided by massive wheels mounted on the carriage.
• the possibility to bevel with MANIPULATOR 3D or without.
• the possibility to use the MANIPULATOR 3D like a stationary station.